Skip to main content
The Real Price of Peel and Stick Roofing
April 14, 2026 at 4:00 PM
photo-1653980617924-60a0365a0624.jpeg

What Does Peel and Stick Roofing Actually Cost?

Peel and stick roofing price typically falls between $1.50 and $2.50 per square foot installed, making it one of the more affordable waterproofing solutions for low-slope and flat roofs. Here's a quick breakdown:

Cost Type Price Range Materials only $0.70 – $1.20 per sq. ft. Professional installation $1.50 – $2.50 per sq. ft. Per roll (100 sq. ft. cap sheet) ~$129 Per roll (200 sq. ft. base sheet) ~$124 Full project (self-adhering type) $200 – $400 per square (100 sq. ft.)

Those numbers can shift quite a bit depending on your roof size, complexity, and where you live. For Metro Atlanta homeowners, labor rates and seasonal demand can push costs toward the higher end.

Peel and stick roofing — also called self-adhering membrane roofing — is a popular choice for flat roofs, low-slope sections, and areas vulnerable to leaks. Unlike traditional roll roofing that requires nails or hot asphalt, it bonds directly to the deck. No open flame. No mechanical fasteners puncturing your roof surface.

That simplicity is part of why it's become a go-to option for garages, home additions, and storm-prone areas. But the total price depends on more than just the roll you buy at the hardware store.

This guide breaks down every cost factor so you know exactly what to expect before signing a contract.

c3c05d5aefc1953d11d4e8e4cebbe2adba72569a.jpg

Understanding Peel and Stick Roofing vs. Traditional Options

When we talk about roll roofing, many homeowners picture the old-school mineral-surfaced rolls that are nailed down and sealed with messy roofing cement. While that is a form of roll roofing, peel and stick (also known as self-adhering or "SA" roofing) is a major technological upgrade.

Traditional roll roofing often relies on mechanical fasteners—nails—which create thousands of tiny holes in your roof. In contrast, Peel & Stick - Roofing - The Home Depot products use a powerful adhesive backing. You simply pull off a release film and press the material onto the deck.

This difference is crucial for What Makes Up Your Roof: A Guide to the Components of a Roof. In a standard system, you might use asphalt-coated felt as an underlayment. However, peel and stick membranes often act as both the underlayment and the final roof surface (in multi-ply systems), or as a high-performance ice and water shield.

The materials are typically made of SBS modified bitumen, which is rubberized asphalt reinforced with fiberglass. This makes the "stick" version much more flexible and durable than standard felt. It self-seals around any stray nails from shingles above, providing a level of leak prevention that traditional options just can't match.

Breaking Down the Peel and Stick Roofing Price

Budgeting for a new roof in Metro Atlanta requires looking at two main buckets: what you pay for the rolls and what you pay the crew to put them down. Because these systems are often installed in two layers (a base sheet and a cap sheet), the peel and stick roofing price is often calculated by the "square"—a roofing term for 100 square feet.

Average Material Costs for Peel and Stick Roofing Price

If you are just buying the materials, expect to pay between $0.70 and $1.20 per square foot. However, these are sold by the roll, not the foot.

  • Cap Sheets: These are the top layers with mineral surfacing (like granules on a shingle). A standard 100 sq. ft. roll of GAF Liberty Cap Sheet typically costs around $129.
  • Base Sheets: These go down first to provide a smooth, adhesive-ready surface. A 200 sq. ft. roll of GAF Liberty Base Sheet usually runs about $124.
  • Specialty Rolls: For small repairs or flashing, you might see aluminum-surfaced rolls. A carton of four 9-inch aluminum rolls can cost around $188, which is helpful for localized waterproofing.

According to data on How Much Does Roll Roofing Cost?, self-adhering types are the premium tier of roll roofing. While basic felt or smooth-surfaced rolls are cheaper, they don't offer the same lifespan or ease of application.

Professional Installation and Labor Rates

While the materials are affordable, labor is where the expertise comes in. In the Atlanta market, professional installation typically adds $1.00 to $3.50 per square foot to the project. This brings the total installed peel and stick roofing price to a range of $1.50 to $5.50 per square foot, depending on the specific system and roof conditions.

For a standard membrane system, Cost to Install a Membrane Roofing System estimates can vary based on your zip code. In areas like Marietta, Alpharetta, or Sandy Springs, labor rates reflect the high demand for skilled trades.

The good news? Peel and stick systems offer significant labor savings compared to "torch-down" roofing. Because there is no need for heavy kettles of hot asphalt or dangerous open flames, a smaller crew can often complete the job faster. Our Services team frequently recommends this for residential low-slope areas because it’s safer for your home and quicker to install.

Factors That Influence Your Total Project Cost

No two roofs are identical. Even if you have the same square footage as your neighbor in Peachtree City, your quote might be different.

Roof Complexity and Regional Peel and Stick Roofing Price Variations

  • Penetrations and Obstacles: Every chimney, skylight, and vent pipe requires careful flashing and detailing. The more "holes" in your roof, the more labor-intensive the project becomes.
  • Surface Preparation: Peel and stick adhesive is incredibly strong, but only if the surface is clean, dry, and smooth. If your old roof needs to be stripped away (tear-off) or if the wood decking underneath is rotted, those repairs will add to the cost. Tear-off alone can add $1.00 to $2.00 per square foot.
  • Temperature Sensitivity: This is a big one for Georgia! Peel and stick products generally require temperatures above 40°F to bond correctly. If we're installing during a cold snap in Woodstock or Kennesaw, we may need to use primers or heat guns to ensure a proper seal, which can slightly increase labor time.
  • Debris Disposal: Don't forget the dumpster! Disposing of old roofing materials usually costs between $200 and $500 depending on the volume.
  • Permits: Most municipalities in Metro Atlanta require a permit for a Roof Replacement, which can add a small fee to the total.

Comparing Costs: Peel and Stick vs. Shingles and EPDM

When deciding on a material, it helps to see how the peel and stick roofing price stacks up against other popular options.

Material Type Installed Cost (Per Sq. Ft.) Expected Lifespan Peel and Stick Roll $1.50 – $5.50 12 – 20 Years Asphalt Shingles $3.50 – $7.00 20 – 30 Years EPDM (Rubber) $5.00 – $10.00 20 – 30 Years Metal (Standing Seam) $8.00 – $14.00 50+ Years

As you can see in our guide on Rolled Roofing vs Shingles: What's Best for a Low Slope Roof, shingles aren't always an option. If your roof pitch is very low (less than a 2:12 slope), shingles will leak. In those cases, peel and stick is the most cost-effective alternative.

If you are considering a thicker rubber membrane, check out the Epdm Roofing Cost Per Square Foot: Price Guide and Budgeting 2026. While EPDM can last longer, the initial investment is significantly higher than peel and stick roll roofing. For many residential projects like a porch roof in Fayetteville or a shed in Hampton, the ROI of peel and stick is hard to beat.

Frequently Asked Questions about Peel and Stick Roofing

How long does a peel and stick roof last?

Typically, a well-installed peel and stick roof will last 15 to 20 years. Mineral-surfaced cap sheets provide excellent UV resistance, which is vital in the Georgia sun. To get the maximum life out of it, we recommend annual inspections to ensure the seams remain tight. You can even re-coat some systems after 8-10 years to extend their life further.

Can I save money with a DIY peel and stick installation?

Yes, you can save on labor, but be careful. While "peel and stick" sounds as easy as a sticker, the preparation is grueling.

If the deck isn't perfectly clean, the adhesive will fail, leading to bubbles and leaks. Furthermore, most manufacturers only honor their 20-year warranties if the product is installed by a certified professional. If you decide to DIY, factor in the cost of tool rentals, safety harnesses, and the risk of having no recourse if a leak occurs.

When is peel and stick the most cost-effective choice?

Peel and stick is the winner for:

  1. Low-Slope Roofs: Where shingles aren't allowed by code.
  2. Detached Structures: Like garages, sheds, or workshops in Newnan or Cumming.
  3. Home Additions: Where you need a quick, reliable waterproof seal.
  4. Storm Repairs: It's an excellent secondary water barrier in high-wind areas.

Conclusion

Choosing the right roof isn't just about finding the lowest price—it's about finding the best value for your specific home. At Matt’s Exteriors, we’ve completed over 12,000 projects across Metro Atlanta since 2007. We know that a peel and stick roofing price that seems too good to be true usually involves cutting corners on surface prep or material quality.

Whether you're in Alpharetta, McDonough, or Peachtree City, we pride ourselves on high-quality workmanship and using trusted materials that stand up to our unique climate. Don't leave your home's protection to chance.

Request a Professional Roof Replacement Estimate today and let our family-owned team help you find the perfect roofing solution for your budget and your home.